craigslist | tools in chattanooga

11 In 1 Credit Card Multi-Tool !BUY 3 GET 1 FREE! (Hixson) $5

2009-12-24T22:12:04-05:00

!GREAT STOCKING STUFFER!

11 TOOLS IN 1

HEAVY DUTY STAINLESS STEEL

COMES WITH CARRY SLEEVE

Call 645-3050

3/4inch air hardwood floor nailer (Ringgold Ga.) $150

2009-12-24T22:03:20-05:00

only nailed 1500 ft with this nailer all most new i have a box of nails to go with it you can buy more at homedepot or lowes it has a case and rubber mallit,same as stanley bosch, i saved over 3000 dollers putting my on floor down,i have other tools toolike a door jam saw.423-309-9242 706-965-8060 ray

HEAVY - DUTY L.E.D. FLASHLIGHTS (Hixson)

2009-12-24T21:51:34-05:00

BRINKMAN 3 WATT L.E.D. FLASHLIGHT - $25
Tempered Glass Lens
Uses 3 AAA Batteries
Shock & Water Resistant
Tough Nylon Construction With Rubber Grips
Push Button On/Off With Silent Signal Feature
30 Times Brighter Than A Standard LED Flashlight

ENERGIZER HARD CASE PROFESSIONAL - $25
4 LED's: 1 White High Intensity - 2 Red Night Vision - 1 Green Pipe Inspection
Rotating Swivel Head
Survives 20' Drop
Run Time: 4 Hour
Batteries: 2 AA
80 Lumens

DORCY 6 WATT 120 LUMENS L.E.D. FLASHLIGHT - $30
6 Watt
120 Lumen
Luxeon K2 LED
Solid State Diode
Weight: .26 lbs
Dimensions: 5.31�
Batteries: 3 AAA
Run Time: 6 Hour
Bezel Diameter: 1.57�
Beam Distance: 164.04 feet
Switch: Tail Cap Push Button With Built In Battery Indicator
Material: O-Rings Seals Precision Machined Anodized Aircraft Aluminum Alloy
Operating Conditions: 30 Degrees Below Zero To Over 130 Degrees Fahrenheit + High Humidity

DORCY "TERMINATOR" 6 WATT 130 LUMENS L.E.D. FLASHLIGHT - $45
6 Watt
130 Lumens
Weight: .8 lbs
Solid State Diode
Run Time: 30 Hours
Bezel Diameter: 3.24�
Beam Distance: 300 ft
Batteries: 6 AA Batteries
20% Wide Viewing Area
80% Focused Center Spot
Precision Reflector System
Bulb Type: K2 Luxeon LED
Dimensions: 9.52�L x 3.24�W
Switch: Side Barrel Rubber Booted Push Button
Operating Conditions: 30 Degrees Below Zero To Over 130 Degrees Fahrenheit + High Humidity
Material: Waterproof O-Rings Seals Gun Metal Gray Precision Machined Anodized Aircraft Aluminum & Heavy Duty Rubber

!SPECIAL!
GET ALL 4 FOR $100
+ I'LL INCLUDE...
Flashlight/Battery Storage Case with An Additional LED Flashlight + Batteries {4C-4D-8AAA-10AA} $36.99 Value FREE!

Call 645-3050

i need to buy welding cables (ringgold)

2009-12-24T21:48:46-05:00

I need a set of welding cables for a craftsman stick welder its the small plug ins 3/8 inch i think call me if you have a set at 423-309-9242 or 706 965 8060 or if you just have one cable. RAY

Mini MagLite + Multi-Tool + Nite Ize Pock-Its Holster !ALL NEW! (Hixson) $40

2009-12-24T21:38:11-05:00

MINI MAGLITE:
Water & Shock Resistant
Anti Roll Shock Ring & Holster
Spare Lamp Secured Inside Tailcap
Converts Quickly To Candle Mode
Anodized Aluminum Knurled Design
High Intensity Adjustable Light Beam (Spot to Flood)

NITE IZE POCK-ITS UTILITY HOLSTER:
Fits Most Multi Tools
Fits Belts Up To 3" Wide
Fits AA & AAA Barrel Flashlights

Front Side:
D-Ring For Keys or Lanyards
Bottom Pocket for Smaller Items
Elastic Loops for Pens or Small Tools
Hook & Loop Closures for Safe Retention of Contents

Back Side:
Large Pocket
Permanent & Quick Release Belt Loops
Lower Portion of Pocket Can Be Accessed Below Belt Loop

WINCHESTER 6 PIECE KNIFE & MULTI-TOOL SET:
Knife
Money Clip
8 Function Pocket Tool
Pocket Knife with Scissors
14 Function Multi-Tool with Tool Bits & Sheath

Call 645-3050

WANTED: PRESSURE WASHER (ATHENS) $1

2009-12-24T21:01:50-05:00

LOOKING FOR A PRESURE WASHER DEAD OR ALIVE GAS OR ELECTRIC PLEASE EMAIL ME OR CALL ME IN DECATUR THANK YOU 1-423-507-3244

Winchester 6 Piece Knife & Multi-Tool Set !NEW! (Hixson) $20

2009-12-24T20:52:36-05:00

!LAST MINUTE CHRISTMAS GIFT!

Folding Knife

8 Function Pocket Tool

Pocket Knife with Scissors

Multi-Function Money Clip

14 Function Multi-Tool with Tool Bits & Sheath

+ I'll Include An 11 In 1 Credit Card Multi-Tool

Call 645-3050

Shopsmith - Drill Press & Bonus! (Rome, GA) $450

2009-12-24T18:58:54-05:00

Shop Smith Mark V in great condition. The headstock was manufactured in March, 1992 - so it comes with the increased 1 1/8 HP motor AND the double-bearing quill that reduces runout to 0.001". Unit comes with drill chuck and key, saw blade and arbor, rip fence and miter gage, casters and a lathe tool rest. As an added bonus, it comes with a drum sander ($32 on SS website) and table insert ($27). This machine works great and likely has the smoothest speed control of any unit I've worked on.

Call or email with any questions:
Phone: 770-715-4244
Email: sladekm [at] honcompany [dot] com

Thanks for looking!
Matt

Dewalt 18v Drill (Dalton, Ga) $180

2009-12-24T16:45:01-05:00

Dewalt 18v variable speed cordless drill driver kit 1/2"

Craftsman 2.75 HP 10" Radial Arm Saw (Suck Creek (Mullins Cove) ) $200

2009-12-24T15:32:05-05:00

Craftsman 2.75 HP 10" Radial Arm Saw. Barely used as indicated by the table bed scoring.
Comes with two blade guards (the old style and the new safety version as well as a home
made roller dolly.

Craftsman 14" Contractor Series Bandsaw (Suck Creek (Mullins Cove)) $250

2009-12-24T15:27:47-05:00

14" Contractor Series 1.5 HP Bandsaw. Comes with Craftsman metal stand, micro-adjustable resaw fence,
cool block blade guides, and 4 blades. I've purchased a larger saw and need the room in my small shop.

JOHN FORCE LIMITED EDITION TOOL BOX (GADSDEN) $2500

2009-12-24T15:03:47-05:00

MAC LIMITED EDITION JOHN FORCE TOOL BOX IN REALLY GOOD CONDITION.IT HAS 10 DRAWERS ON TOP AND 13 DRAWERS ON THE BOTTOM AND THE TOP OPENS FOR MORE STORAGE.FEEL FREE TO STOP BY TO CHECK IT .

I CAN DELIVER FOR $1.25 A LOADED MILE

THANKS FOR LOOKING AND MERRY CHRISTMAS

CALL 256-996-1445

MAC LIMITED EDITION JOHN FORCE TOOL BOX (FORT PAYNE AL.) $2500

2009-12-24T14:59:03-05:00

MAC LIMITED EDITION JOHN FORCE TOOL BOX IN REALLY GOOD CONDITION.IT HAS 10 DRAWERS ON TOP AND 13 DRAWERS ON THE BOTTOM AND THE TOP OPENS FOR MORE STORAGE.FEEL FREE TO STOP BY TO CHECK IT .

BUYER IS RESPONSIBLE FOR PICK UP OR SHIPPING FROM ZIP CODE 35967

I CAN DELIVER FOR $1.25 A LOADED MILE

THANKS FOR LOOKING AND HAPPY BIDDING

CALL 256-996-1445

Black&Decker 12V Firestorm Cordless Drill and Flashlight Set (Dayton, TN) $40

2009-12-24T11:44:53-05:00

I was given this set as a gift a few years ago (2005) but have had little time to use it since moving to college. The drill and flashlight are just like new but the battery recharger doesn't work. I think the recharger could be fixed with a little time and effort. Feel free to call me anytime at 423-413-8469.

Craftsman Planer/Molder (Chickamauga, GA) $400

2009-12-24T08:49:10-05:00

CRAFTSMAN PROFESSIONAL PLANER/MOLDER ~ 12.5 INCH

* STORED IN WORKSHOP
* VERY LITTLE USE
* 2 SPEED AUTO FEED
* 2 1/2 HP

Located in High Point Community

Ingersoll Rand 1/8 Ton Hoists (Hixson, TN) $1200

2009-12-24T02:01:56-05:00

Single Phase (110 volt) direct plug in Ingersoll Rand 1/8 ton hoists with 10 ft chains. These hoists retail for $2000.00 per unit new and are only about 6 months old. I have two for sale. If you would like to purchase both as a set, I can let the pair go for $2000.00. Otherwise, they are $1200.00 per unit. Please feel free to contact me on my cell phone. Serious inquiries only please. (256) 658-3500. Please take a look at the images attached. Thank you!

Craftsman 10" Radial Arm Saw (Graysille tn) $150

2009-12-23T22:41:08-05:00

For sale is a Craftsman 10" Radial Arm Saw. Works Great.Asking $150. Please call (423) 554-4178 or email me. Thanks for looking.

Speeflo 6900 Gas Sprayer Used (Hixson) $2000

2009-12-23T20:35:49-05:00

Speeflo 6900 Power Twin gas powered sprayer for sale.Retails for over $3000.00 Good condition. Has had approximately 230 gallons of paint run through it. Work horse.

Description link: http://www.spraysystemsonline.com/site/marketplace/equipmentshowroom/airless/airlesspumps/gas/products/powertwin6900gh.html

***note: the link is for a new sprayer, and for detailed specs only. Mine is a used sprayer in very good shape.***

Linolieum Roller (chatt) $65

2009-12-23T19:55:12-05:00

20 to 30lbs? roller w/ handle for rolling out glue type floor coverings (to smooth out seams and to roll out bubbles in floor coverings Call (423)667*3437

Lincon Welder (Harrison) $1500

2009-12-23T13:42:48-05:00

Ranger 250 all process used welder gas powered, on wheels $1,500
423-802-0597

AIR COMPRESSOR 4 GAL. (EAST RIDGE ) $125

2009-12-23T11:40:44-05:00

WORKS GREAT..SUPER NICE ..423-899-3820

3 Legged Pipe Vice (Flintstone) $100

2009-12-23T08:56:03-05:00

In good condition. Moving must sell. Used. Call Joe at 423-544-4676 or 706-820-2409.

Portable Pipe Threader (Flintstone) $500

2009-12-23T08:54:30-05:00

Like new and look new. No threading dies. Rigid brand. Barely used. Call Joe at 423-544-4676 or 706-820-2409. Moving must sell. Other tools also for sale.

LINCOLN CV 305/LF-72 WIREFEED WELDER 3PH 60HZWITH GUN (CHATTANOOGA) $1500

2009-12-23T08:21:29-05:00

Lincoln CV 305 ready pak with wire feeder. Used. In great shape. Ready to go. $1500 obo. email me for more info. If you have a shop then this is the welder for you. Welds mild steel, stainless, aluminum, and alloy metals. Priced to sell, normal retail is $3600.

Skil 18-Volt Drill/Driver 4-Tool Ni-Cd Combo Kit (Chatsworth,Ga) $70

2009-12-22T21:16:16-05:00

Skil 18-Volt Drill 4-Tool Ni-Cd Combo Kit that was given to me as a gift but just have to many drill sets.This is brand new and has never been opened as this retails for $129.99 new.Here's the spec's below:

�" 2-Speed drill/driver: high speed drilling, high torque driving
Orbital jigsaw with built-in work light: for more accurate cuts
Multi-finishing sander with quick-change pad system: allows for quick and easy pad changes
Pivoting-head flashlight: lets you direct light where you need it
Includes 1 double ended bit (#2 Philips and slotted), 1 fast cut wood jigsaw blade and 5 pcs sandpaper (2) 60 grit, (3) 120 grit

Number of Batteries Included for Tool: 1
Description of Tools: 18V Drill/ Driver, 18V Orbital Jigsaw, 18V Multi-Finishing Sander, 18V Pivoting Head Flashlight
Charge Time (Hours): 1.0
Battery Amp Hour (Amps): 1.25
Accessories Included: Yes
UL Safety Listing: Yes
CSA Safety Listing: Yes
ETL Safety Listing: No
Corded/Cordless: Cordless
Battery Voltage: 18

AIR ELECTRIC HAND TOOL LIQUIDATION (FORT OGLETHORPE GA.30742) $1

2009-12-22T18:18:10-05:00

NO EMAILS WE DO NOT ANSWER THEM TOO MANY SPAMMERS)..... CALLS ONLY...... CALL FROM 10 TO 5 423-260-4916. JR.
BIG SALE ON ALL TYPES OF CONTRACTOR TOOLS.WE HAVE OVER 30,000.00 WORTH OF AIR GUNS BRAD NAILERS,ROOFING,FRAMING, FINISHING NAILERS,AIR COMPRESSORS,IN STOCK AND ON HAND,YOU NAME WE MAY HAVE IT ANY THING TO BUILD A HOUSE ALL USED AND IN GREAT SHAPE.PLUS WE HAVE A LOT OF NEW WRENCHES.ABOUT 20.000.00 WORTH.WE ARE BRINGING IN MORE LOADS DAILY WE HAVE A WARE HOUSE FULL..ALL NAME BRAND'S..
DEWALT,PORTER CABLE,STARTING AT 30.00 AND UP ALL TYPES OF MITER SAWS 30.00 AND UP.. AIR COMPRESSOR'S
.HURRY FIRST COME GETS BEST DEALS WE ARE LIQUIDATING A LARGE INVENTORY.OF OVER 250.000.00...OFF LEASE TOOLS.. USED BY LARGE COMPANYS TO REBUILD DISASTER AREA'S.SOME NEVER USED SOME VERY LITTLE USE.....AND SOME USED A LOT...ALSO SOME FOR PARTS........

Craftsman Reman 19.2v Drill 2 Saws Light set (Chattanooga TN) $125

2009-12-22T16:31:02-05:00

Used set of remanufactured Craftsman 19.2 Volt Tools with 2 batteries, Charger, sawzall, circular saw, flouresent light, drill / screwgun as pictured, they were bought from the Sears store remanufactured, they have scuffs and scratches on them but are in good working condition.

MAKITA 3621 ROUTER & DP 4000 1/2 DRILL (CHATTANOOGA) $150

2009-12-22T16:12:17-05:00

Variable speed (0 - 900 RPM) for drilling in a wide variety of materials. Retractable belt clip allows operation in tight areas Ergonomically designed rubberized grips for positive control Large trigger switch is conveniently located. Comfortable side handle rotates 360?. All ball and needle bearing construction for long tool life. Brushes are easily accessible for easy replacement. Double insulated. ALSO Makita 3621 1-1/4 HP Electric Plunge Router, Like New used 1 time, has case and straight edge, cash talks, READY TO SELL TODAY BEST OFFER FOR BOTH: CALL (423) 718 - 4651

3m face resppirator new & used (Jasper tn ) $100

2009-12-22T13:36:02-05:00

3m Face respirator
one NEW one USED
Retail 275.00 SAVE MONEY!
NEW_125.00
USED $75 or best offer
Both $170

STREAMLIGHT STINGER LED (Ooltewah) $80

2009-12-22T12:56:30-05:00

STREAMLIGHT STINGER LED - Flashlight
BRAND NEW, NEVER USED!!!!
I got 2 of these exact same flashlights for Christmas!
Awesome flashlight!!!!!

Email with any questions.......

MeRrY ChRiStMaS!!!!!

Rubbermaid Vertical Storage Shed (Cleveland, TN) $150

2009-12-22T11:06:18-05:00

LIKE NEW!!!
17 cu. ft. of storage space
6'H x 2'6"W x 21"D
Heavy-duty plastic construction, won't rust or rot
Molded in grooves for shelves (wood shelves included)
Gridded floor helps keep tools in place
Lockable
Taupe and evergreen color
Durable, leak-resistant, dent-resistant and weather resistant

router for sale (chattanooga/ e r) $60

2009-12-22T11:05:36-05:00

craftsman router/ will take $60 for router and table or $50 for just the router
older model, used very little.in great condition, it's crftsman comercial

Campbell Hausfield Stick Welder (US Money Shops) $179

2009-12-22T10:17:08-05:00

Brand new Campbell Hausfield 115V stick welder for sale. Kit also includes welding gloves and helmet. Don't pay retail prices for tools when you can get great tools for less at US Money Shops.

Contact Brandon at 423-499-9523 for more info.

Come see us at 5952 Brainerd Rd next to Big Lots.

www.usmoneyshops.com

Tools/equipment/supplies,boats/campers/full shop

2009-12-22T09:00:57-05:00

Please see my ad under Business for sale.cwbennettjr@hotmail.com

weedeater (chickamauga) $30

2009-12-22T02:12:53-05:00

i have a great weedeater runs great asking 30.00 call 706-375-1226

LARGE SAND BLAST CABNET (ROSSVILLE GA) $100

2009-12-21T23:56:50-05:00

HAVE LARGE BLAST CABNET, NEEDS GLOVES AND NEW GLASS 706 581 5511 DAYS OR EVENINGS

snap on 7drawer toolbox (cleveland tn) $450

2009-12-21T23:09:13-05:00

i am selling my tool box.it has never been used,i never bought tools to fill it bc i have another box that i use for the track.this box is 999.95 on snapon.com,i am selling it for half of that.
Convenient and Secure
� Locking components are welded and located inside of the unit for security
� Lock 'n Roll� drawers on roll cab prevent unwanted opening during transport
� 100 lb rated ball slides deliver smooth operation
� Round key lock
Rugged
� Full double wall construction with stiffeners between walls
� Casters and handles are attached with threaded fasteners to welded, steel nut plates
� Hems on drawer edges provide strength and protection from sharp edges
Stock # KRA2007
Name Roll Cab, 7 Drawers, Red
Price** $995.00
Brand Snap-on
Country Of Origin Canada
Color Red
Cubic Inches (cm�) 9,374 (153,610)
Square Inches (cm�) 2,621 (16,910)
Load Capacity, lbs. (kg) 1,120 (508)
Net Weight, lbs. (kg) 170 (77.1)
Shipping Weight, lbs. (kg) 195 (88.5)
Caster Size, inches 5 x 1.25
No. of Drawers 7
No. of Shelves/Trays 0 / 0
Width, inches (mm) 26 23/32 (678.7)
Depth, inches (mm) 19 13/16 (503.4)
Height, inches (mm) 37 7/16 (951.0)

it is ready to go right now,need to sell,do not need it,christmas is here,could use some spare cash but i will not let it go for nothing,so dont try to low-ball me.my number is 423-790-6408
below is a photo from the website,which is exactly how it is right now,with the snapon red

1/2 inch impact wrench (flintstone) $30

2009-12-21T20:37:44-05:00

brand new impact wrench still in box. 30.00 each or 50.00 for both. trade for an upright compressor.

lawn & landscaping plugger (ooltewah tn.) $1500

2009-12-21T18:20:36-05:00

6 ft. 3 pt. hitch lawn plugger. like new 423-593-9183

wood lathe (graysville TN) $150

2009-12-21T17:35:25-05:00

just got new lathe need to sell old one nothing wrong with lathe paid 250 for it about two years ago great little lathe

BAN SAW (ROSSVILLE GA) $150

2009-12-21T17:13:43-05:00

SAW AND STAND WITH MOTOR SEVERAL DIFFERENT KINDS OF BLADES (CALL 706 581 5511 ) DAYS OR EVENINGS

CHAIN FALL AND A FRAME (ROSSVILLE GA) $200

2009-12-21T17:03:05-05:00

LARGE CHAIN HOIST AND A FRAME (CALL 706 581 5511 DAYS OR EVENINGS

Carftsman Table Saw (Red Bank) $180

2009-12-21T15:39:05-05:00

Craftsman 10" Table Saw
w/ Rolling Base and Router Mount
Model #315.228390
Good Condition

back pack vac by windsor (chattanooga) $300

2009-12-21T15:37:10-05:00

this vac can be used for just about anything from around the house to cleaning up a mess from a remodeling project serious calls only 423-313-0132

Scroll saw (Ooltewah) $70

2009-12-21T14:40:53-05:00

***MUST SELL****Scroll saw, 18" Ryobi hardly used, asking $70 OBO call 423-605-3351 leave a message if no answer.

RIFDGID 1224 THREADING MACHINE....."pipe threader 4 sale...deal!LOOK! (DALTON/WILL DELIVER) $1

2009-12-21T14:25:07-05:00

This Ridgid 1224 threader can do 1/4" thru 4" pipe. Comes with both dieheads and stand. Built in oiler!

The Ridgid 1224 has a reversible 1-1/2 hp motor...EXCELLENT COND...HAS FOOT PEDAL AND WORKS LIKE NEW....ASKING ONLY$2500.O.B.O...ALL REASONABLE OFFERS WILL BE CONSIDERED...PLEASE LEAVE CONTACT INFO...678 748-0384

CRAFTSMAN LAWNMOWER GREAT SHAPE (CHATT) $75

2009-12-21T12:06:00-05:00

RUNS LIKE NEW, OIL CHANGED AND AIR FILTER

423-838-8906

lots of antique tools (east ridge)

2009-12-21T11:36:01-05:00

100's of old tools, farm and carpenter tools cheap must go 423-894-2441

Brand New 17 Gallon Compressor (US Money Shops) $119

2009-12-21T10:00:36-05:00

We have a brand new 17 gallon 155 PSI Air Compressor has a hose and mini air flow gun with it. The air compressor is a Harbor Freight Tools brand.

Contact Brandon at 423-499-9523 for more info.

Come see our great selection of tools today at 5952 Brainerd Rd next to Big Lots.

www.usmoneyshops.com

Snap-on Tool Box (Mcdonald) $800

2009-12-21T08:00:49-05:00

I have a Snap-On Toolbox in great shape for 800 dollars. will post pic soon 423-244-4946 mike

Powerwasher Excell 2200 PSI (Chattanooga TN Area) $90

2009-12-21T06:18:43-05:00

Excell 2200 PSI Powerwasher, hose not included, MSRP- $349.00

ONLY USED A FEW TIMES

$90.00

Call 423-316-3672 or reply by email

Like New 120V Matco Welder $400 obo!!

2009-12-20T23:27:31-05:00

MUST SELL!! A Like New 120 volt Matco welder for $400 obo! This welder sales new for $999. I bought it new and it has only been used a couple of times by me. Just have it sitting around taking up space and need to get it gone.
Great chance to get a nice welder for half of what it cost new!
Cash only and local pickup preffered.
If you have any questions or reasonable offers, please give me a call or text at 423-255-8486 and ask for Jonathan. Thanks.

No emails and no Spammers Please!

90 amp Mig wire feed welder (downtown) $85

2009-12-20T23:16:54-05:00

From Harbor Freight but brand new, never even been plugged in.

torpedo heater - kerosene or diesel (downtown) $100

2009-12-20T23:16:39-05:00

50,000 btu Ready heater in great working condition though it is a bit dirty from being on construction sites.

Framing nailer (Red Bank) $175

2009-12-20T14:01:45-05:00

Like new, seldom used - Duo-Fast framing nailer - NSP-350F w/1000+ nails

Shopsmith Mark V (Chattanooga Tn) $750

2009-12-20T12:11:50-05:00

SHOPSMITH MARK V......Excellant condition....like new. Make a great holiday gift. For more information contact Dennis at 423-580-5050

MOTOR / POWER SPECIFICATION
COMMENT

Amperage
13.5 AMPS
Operates on ordinary household circuit

Horsepower
Develops over 2 HP
More than enough muscle for your toughest jobs

Speed Range
Infinitely variable 700 to 5200 RPM
Lets you match speed with task for best results

TABLE SAW

Main Table Size
17-1/2" x 22"
Blade Dia.
10"

Max. Depth-of-cut
3-1/4" @ 0o
Saws completely through doubled-up two-by lumber

DISC SANDER

Disc Dia.
12"
A full 113 Sq. In. of sanding surface

Disc Feed
4-1/4"
Lets you feed Sanding Disc into stationary workpiece

Miter Range
30o to 120o
Holds your stock at precise angle during sanding

HORIZONTAL BORING MACHINE

Max. Stock Length
Unlimited
Great for long boards and large project components

Quill Feed
4-1/4"
Feeds bit into your stock, as with Vertical Drill Press

VERTICAL DRILL PRESS

Capacity
Drills to center of 16-1/2" workpiece
It is rare for typical Drill Press tasks to require more

Main Table Size
17-1/2" x 22"

Max. Chuck-To-Table
25"
Can drill project into large component assemblies

Max. Chuck-To-Floor
58"
See above

Quill Feed
4-1/4"
Feeds the bit into your stock

LATHE

Swing Over Ways
16-1/2"
Handles large diameter faceplate turnings

Max. Between Centers
34"
Turns table legs, porch rails,
etc. up to 34" long - or small projects such as pens or miniatures

Tool Rest
360o swing of rest & arm
Simplifies Tool Rest-to-workpiece alignment

Miller Big Blue 400 Welder (Decatur Tennessee) $6000

2009-12-20T09:46:26-05:00

42 HP Deutz..Diesel 3 cylinder air cooled engine. 3 K internal generator with 120/250 volt. Only 700 hours and in like new condition always garaged. Mounted on self contained trailer. New welding leads and 120 feet of cable.Call Stacy to make an offer at 423-333-4552

Car Buffer and Polisher in box with case (Hixson) $10

2009-12-20T08:17:52-05:00

Like new, used once. Comes with carrying case.

FS: Shopsmith Mark-V (Cleveland TN) $550

2009-12-20T06:47:45-05:00

Shopsmith Mark-V multi-purpose woodworking machine. 10" table saw, lathe, disc sander, drill press.
423-650-4415

Blue Hard Hat (Hixson) $5

2009-12-19T22:12:27-05:00

This hard hat is brand new....never used.
Just $5.
Call Diane
423-400-4786

Goggles/masks and protective eyewear (Hixson) $5

2009-12-19T21:44:43-05:00

New.....and 3 choices to choose from...only $5 each.
423-400-4786 Call Diane

Open Trailer for sale (Red Bank) $850

2009-12-19T18:48:15-05:00

14' trailer for sale. 1&1/2 year old. Nice shape, barely used. call 423-364-2503 for info

ELEC. LEAF BLOWER (Soddy Daisy) $20

2009-12-19T18:28:09-05:00

Leaf blower works great. Has all attachments. $20 takes it!
(423) 508-2631

welding curtains (harrison,tn) $200

2009-12-19T13:15:43-05:00

like new set of welding blinds all 4 sides 6' tall x 6' wide each side 200.00 firm

Speed Glass Welding Helment (Ooltewah) $300

2009-12-19T13:01:17-05:00

I have a 3M speedglas welding helment with all attachments.

ADFLO SYSTEM, COMPLETE WITH CHARGER.

This is a $1500.00 helment. I need to sale.

$300.00 OBO!

It is brand new.

I can be reached at
5413 Hunter Rd
Ooltewah TN

Phone 423-834-2487

Email danny.mahaffey@comcast.net

INDUSTRIAL COMPRESSOR (Ooltewah/chatt) $500

2009-12-19T12:43:39-05:00

5hp 3 phase motor .needs wiring for motor . nice compressor .i never used it to big for my space.
call scott @ 423-280-0275

Commercial Rockwell/Delta Radial Arm Saw (Harrison,Tennessee)

2009-12-19T12:25:05-05:00

This is a Rockwell/Delta Radial Arm Saw, Works good! 12 inch saw blade, 3 horse motor Series 14-RAS 423-838-6126

MILWAUKEE PORTA-BAND (TRION,GA.) $200

2009-12-19T10:56:52-05:00

I HAVE A LIKE NEW DEEP CUT PORTA BAND FOR SALE IT IS A MILWAUKEE BRAND. ONLY BEEN USED TWICE. $200.00 COMES WITH CASE AND MANUAL. CALL WAYNE AT 706-857-1370 OR E-MAIL AT HILLPW@CHARTER.NET

WTB A FLOOR JACK (HIXSON)

2009-12-19T08:22:14-05:00

NEED A 2 OR 3 TON FLOOR JACK 423 355 7247

CARPENTER PENCILS 72 FOR $12.00

2009-12-19T00:41:58-05:00

CARPENTER PENCILS
NEW IN BOX
72 FOR $12.00

CASH ONLY
STOP BY 2525 CLOUDSPRINGS RD, ROSSVILLE GA 30741
OR CALL BARRY 423-316-1754
Email: btoolsnmore@comcast.net
USE THIS QUICK LINK TO VIEW MY EBAY STORE:
http://Stores.ebay.com/Tools-Collectibles-and-More

cylinder head shop/trade or sale (unionville) $11500

2009-12-19T00:24:02-05:00

nice working shop like new,great deal will trade for late modle suv,w/a trans or nice camero or? 931 294 5912 DALE

Trash pump (lafayette) $400

2009-12-18T22:19:26-05:00

a friend of mine has a brand new titan trash pump 3 inch suction hose and discharge hose if u would like pics email me and i will send pics

Poulian lawn mower (cleveland) $150

2009-12-18T18:03:22-05:00

One year old Poulan self prepelled 6.5 mower. Mulich/bag.

Milwaukee Jobsite Radio/Charger (Ringgold) $75

2009-12-18T17:17:21-05:00

Milwaukee jobsite radio & battery charger. Brand new, sealed in box. Great sound, Rockford Fosgate system. Just about indestructible. Perfect for shop or outdoors. Pic is of mine, have another unopened. Has tool pouch on back side. Runs on 110V or battery and charges tool battery. Great Christmas gift. Email or call 423-653-4151. Thanks.

12V, 14V, 18V, tool, rechargeable, nicad

MAKITA DP-4000 1/2 7AMP DRILL (CHATTANOOGA) $100

2009-12-18T16:31:57-05:00

Central Pneumatic 2 in 1 brad/stapeler (Chattanooga) $35

2009-12-18T16:24:13-05:00

Central Pneumatic brad gun / Stapeler ! Shoots 3/8" - 1 1/4" 18 gauge brads! Also shoots 1/4" Crown staples from 1/2" - 1 1/4 " ! Very clean gun! Works Great! Have 1 full box of 1" crown staples to go with and a variety of brad nails to go with! Can plug in here @ the house! Thanks!

Craftsman Finish Nailer (Chattanooga) $85

2009-12-18T16:23:45-05:00

Craftsman Finish nailer ! About 3 years old ! Very clean ! Works Great! Always oiled! Shoots 3/4 " - 2 1/2 " 16 gauge nails! Have more than 1 full box of nails to go with! Can plug in here @ house! Must see!

Ridgid tool set (Cleveland Tn) $200

2009-12-18T15:55:56-05:00

Ridgid mobile air compressor and finish nailer kit. Like new condition..........

U.S. Money Shops
500 S Lee hwy SW
Cleveland TN 37311
(423)472-3073
Call Tyler

Ryobi 18" scroll saw (Ooltewah) $80

2009-12-18T15:52:47-05:00

Ryobi 18" scroll saw, used a few times, model sc18ovs call 423-605-3351 leave message if no answer

Tapco Pro 14 Siding Brake 10'6'' (Tools) $1000

2009-12-18T15:31:34-05:00

Bought new in December 2005 for tax write off, used about thirty minutes on my own house, never been on a job site,only used by owner for more information call 423 499 6342 leave name and phone number. $1000.00 firm only serious buyers please.Thank you!

* Makita 3621 1-1/4 HP Electric Plunge Router * (CHATTANOOGA) $130

2009-12-18T13:25:50-05:00

Makita 3621 1-1/4 HP Electric Plunge Router, Like New used 1 time, has case and straight edge, cash talks, best offer call (423) 718 - 4751

ALMOST NEW LINCON WELDER + TRAILER (DUNLAP TN) $3500

2009-12-18T12:33:59-05:00

LIKE NEW WELDER AN GENARATOR ON A NEW TRAILER CALL ONLY PUT ON FOR FRIEND 423-432-7151

Hirsh Table Saw (Ringgold) $50

2009-12-18T11:57:42-05:00

Hirsh Table Saw with 2 1/4 HP Black & Decker #7361 7 1/4" sawforce 200. Cleaning garage out. 50.00 or offer Call Steve 423-645-2634 . Will meet.

RIDGID 1822-I PIPE THREADER 4SALE..GREAT COND...PIPE THREADER (DALTON,WILL DELIVER..LEAVE INFO PLEASE) $1

2009-12-18T11:28:08-05:00

THIS THREADER IS IN EXCELLENT COND...COMES COMPLETE WITH STAND AND 2 DIE HEADS,,,GREAT DEAL...ASKING ONLY$2000 OR BEST REASONABLE OFFER...PLEASE LEAVE CONTACT INFO...PRICED FOR QUICK SALE...WILL ENTERTAIN ALL OFFERS.....PAID OVER$4700 NEW...$FIRST$1750 AND ITS YOURS...GREAT DEAL

Model 1822-I Threading Machine

--------------------------------------------------------------------------------

Features

Heavy-duty automatic chucking. Threads a wide range of material including black and galvanized pipe, stainless steel, IMC, PVC and heavy-wall conduit
Induction motor (81 db) delivers constant 45 or 16 RPM as required
Constant and proper lubrication of dies and workpiece with through-head oiling
Triple filtration provides for longer oil pump life and clean threads
High impact-resistant covers for durability
Special jaw inserts allows for quick, easy replacement

Specifications

Pipe Capacity: 1/8" - 2" (3 mm - 50 mm), 2 1/2" - 4" (62 mm - 100 mm) with No. 141 Geared Threader
Bolt Capacity: 1/4" - 2" (6 mm - 50 mm)
Motor: 1 1/2 HP, single-phase, 60 Hz or 50 Hz, induction
Motor Control: Open/Off/Close, heavy-duty rotary type switch and integral safety foot switch
Spindle Speed: 45 and 16 RPM, right hand, can be adapted to left hand operation
Transmission: Two-speed (45 RPM for standard pipe and 16 RPM for low-voltage and special materials)
Front Chuck: Automatic gripping/centering
Rear Centering Device: Automatic, centering only
Cutter: Model 364, 1/8" - 2" full-floating, self-centering with E-1032 Cutter Wheel
Reamer: Model 344, 1/8" - 2" right hand only
Clutch: Shiftable cone type
Oil Pump: Self-priming gerotor

--------------------------------------------------------------------------------

40' aluminum extension ladder (Dunlap, TN) $250

2009-12-18T11:19:51-05:00

40' aluminum extension ladder, great condition, dry stored, $250.00 423-991-1453

Central Pneumatic Framing Nailer (US Money Shops) $99

2009-12-18T10:21:10-05:00

Brand New Central Pnuematic Framing Nailer available for sale at US Money Shops! Shoots 2" to 3 1'2 strip nails. Includes case, oil, nails, and sunglasses.

Contact Brandon at 423-499-9523 for the latest info on our outstanding selection of power tools.

Come see us at 5952 Brainerd Rd next to Big Lots.

www.usmoneyshops.com

DeWalt sawzall (Athens, TN) $40

2009-12-18T10:07:39-05:00

used dewalt sawzall for sale it has been used some but still has some life left. Call or text me with any ?s I will consider reasonable offers 423-920-9499

Power Tools, New in Box (Tiftonia) $1

2009-12-18T09:21:42-05:00

We have several brand name power tools, still new unopened packages, left over in store inventory that I'd like to sell. They are at McBryar Lumber Co, 3816 Cummings Hwy. (423) 825-5246.

-Skil model HD77 Worm Drive circular saw. These last forever, but heavier than cheaper saws. $165.00
-Bosch model B7050 Finishing/Palm Sander w/dust collector $55.00
-Makita 6406 3/8" variable-speed reversible drill $50.00

I won't ship these to Nigeria, won't take cashier's checks from Kenya to cover shipping, so Scammers, don't waste your time. Craigslist is local, I plan to sell locally. Thanks for looking

SNAP ON TOOL BOX (Harrison) $2000

2009-12-18T07:39:37-05:00

Snap on tool box org. $10,000. Large bottom & also top box, two side boxes. Tools included $2,000 Please call 344-57-44

Dewalt Cordless Tool Set (Winchester) $250

2009-12-17T22:30:03-05:00

Dewalt cordless tool set for sale.
Comes with,
Circular Saw,
Flash Lite,
Hammer Drill,(with handle)
Reciprocating Saw,
1-12V battery,
2-18V batteries (does not hold charge)
Black Dewalt Case

Asking $250 but all reasonable offers will be considered.

HVAC TOOLS

2009-12-17T22:12:46-05:00

MALCO C5 5 BLADE CRIMPER
$25.00 New in package
MALCO HC1S ADJUSTABLE HOLE CUTTER
$50.00 New in package
MALCO S2 3'' HAND SEAMER
$34.00 New in package
MALCO M12N ANDY SNIP ALUMINUM SHEARS
$25.00 New in package

STOP BY 2525 CLOUDSPRINGS RD, ROSSVILLE GA 30741
OR CALL BARRY 423-316-1754
Email: btoolsnmore@comcast.net
USE THIS QUICK LINK TO VIEW MY EBAY STORE:
http://Stores.ebay.com/Tools-Collectibles-and-More

PROTO COMBINATION WRENCH SET - $550

2009-12-17T22:11:25-05:00

PROTO COMBINATION WRENCH SET
$550.00 set
Sizes:
2 1/8"
2 1/16"
2"
1 7/8"
1 13/16"
1 3/4"
1 11/16"
1 5/8"
1 1/2"
1 7/16"
1 3/8"
1 5/16"
Used but not abused
Cash Only
STOP BY 2525 CLOUDSPRINGS RD, ROSSVILLE GA 30741
OR CALL BARRY 423-316-1754
Email: btoolsnmore@comcast.net
USE THIS QUICK LINK TO VIEW MY EBAY STORE:
http://Stores.ebay.com/Tools-Collectibles-and-More

C-CLAMPS - $30

2009-12-17T22:07:45-05:00

C-CLAMPS
$30.00 EACH

STOP BY 2525 CLOUDSPRINGS RD, ROSSVILLE GA 30741
OR CALL BARRY 423-316-1754
Email: btoolsnmore@comcast.net
USE THIS QUICK LINK TO VIEW MY EBAY STORE:
http://Stores.ebay.com/Tools-Collectibles-and-More

CAMPBELL HAUSFELD PORTABLE AIR TANK - $25

2009-12-17T22:06:33-05:00

CAMPBELL HAUSFELD PORTABLE AIR TANK
$25.00 New

STOP BY 2525 CLOUDSPRINGS RD, ROSSVILLE GA 30741
OR CALL BARRY 423-316-1754
Email: btoolsnmore@comcast.net
USE THIS QUICK LINK TO VIEW MY EBAY STORE:
http://Stores.ebay.com/Tools-Collectibles-and-More

GREY PNEUMATIC 1705SN 5pc IMPACT SPINDLE NUT SOCKET SET - $45

2009-12-17T22:05:24-05:00

GREY PNEUMATIC
1705SN
5 PIECE METRIC SPINDLE NUT IMPACT SOCKET SET
SIZES: 30, 32, 34, 35, 36mm
These sockets are designed specifically to remove spindle nuts on passenger and light trucks and areof a heavy duty design. They are also useful in any application that requires a heavy duty socket.
THIS SET HAS BEEN USED, BUT IS IN EXCELLENT CONDITION

STOP BY 2525 CLOUDSPRINGS RD, ROSSVILLE GA 30741
OR CALL BARRY 423-316-1754
Email: btoolsnmore@comcast.net
USE THIS QUICK LINK TO VIEW MY EBAY STORE:
http://Stores.ebay.com/Tools-Collectibles-and-More

MITUTOYO 505-645-50 DIAL CALIPER - $120

2009-12-17T22:04:29-05:00

MITUTOYO
505-645-50
DIAL CALIPER
Extra rigid main beam.
Direct reading .001". Accuracy: .001" in 6 inches.
Hardened Stainless Steel throughout.
Micro-fine graduations.
Adjustable and locking bezel.
Covered rack to keep gear teeth clean.
Easy zero adjustment.
Satin chrome finish.
Furnished in fitted case.
USED VERY LITTLE, EXCELLENT CONDITION

STOP BY 2525 CLOUDSPRINGS RD, ROSSVILLE GA 30741
OR CALL BARRY 423-316-1754
Email: btoolsnmore@comcast.net
USE THIS QUICK LINK TO VIEW MY EBAY STORE:
http://Stores.ebay.com/Tools-Collectibles-and-More

SNAP-ON 206AFSA 6pc 3/8" DRIVE UNIVERSAL SOCKET SET - $140

2009-12-17T22:03:03-05:00

SNAP-ON

206AFSA

3/8" DRIVE UNIVERSAL SHALLOW SOCKET SET, 6 POINT

Stock # 206AFSA
Name Set, Socket, Universal, Shallow, 6-Point (6 pcs.) (7/16" to 3/4")
SNAP ON Price** $224.75
Description 3/8" Dr. Universal Socket Set, 6-Point (6 pcs)

STOP BY 2525 CLOUDSPRINGS RD, ROSSVILLE GA 30741
OR CALL BARRY 423-316-1754
Email: btoolsnmore@comcast.net
USE THIS QUICK LINK TO VIEW MY EBAY STORE:
http://Stores.ebay.com/Tools-Collectibles-and-More

Rigid Miter Saw 12" (Rock Spring, GA) $300

2009-12-17T19:57:54-05:00

Rigid double bevel miter say (no slide), 12" carbide blade, laser. GREAT CONDITION!!!!! comes with a Ryobi saw stand, folds up and supports extend out. MUST SELL!!!!! call David at 423-364-0751

2 Brad Nailers, Air (Signal Mountain) $100

2009-12-17T17:53:57-05:00

2 Craftsman Brad Nailers. Both in good shape. One shoots brads up to 2 inches in length, the other is a 1/4" brad stapler that shoots staples from 1/2" to 7/8" inch. Both air nailers. $100.00 for both, cash, no checks. 423-991-0393 or reply to this e-mail. Thanks

ladders (soddy daisy) $125

2009-12-17T07:48:48-05:00

I have 4 ladders for sale......$125
extend-able 4-16ft
6ft
20ft
24ft
if interested please call 423-451-7581
thanks